Ever had water start gushing out of something that’s fundamentally made of eldritch terror and high voltage? Why I’ve never…..
And it gave me a nice shower the moment I got the door open. And I accidentally did the Wrong Button Thing again in the confusion.
So the fitting that became a showerhead is the one on the left. I didn’t get a picture of it but basically it’s the same as half of that coupler I found in a parts box that’s sitting on top… However it didn’t have the O-ring. The snapped trapezoidal profile ring sitting on the right sits in the bottom of the socket. The fitting plugs in there, held against the trapezoidal ring by two locking pins, you can see the head of one of them on top here. I can’t identify the type of connector or even find any evidence that it ever existed. Anywhere. Needless to say I didn’t have a spare for that ring, but luckily taking one of the round o rings off that close nipple and putting it in the seat in the socket and reinstalling the thing worked! No more warm shower of DI water.
Oh, and now I know how the funky bascule bridges work. A rather buzzy motor cranks up in there and rotates pinion gears that engage with rack gears on these two long braces on each side of the bascule, which protrude outward from the waterway to lift the well balanced assembly. You would be well advised to stay clear of that counterweight as it comes awkwardly close to the road surface as it nears fully open!
And this is uhh, Stuffing Shit In Tower Elevators, Medium Difficulty Level. I rode down squatted inside the cabinet and it wasn’t the best. The elevator is kinda both bigger and smaller than it looks as it’s a weird shape and the control cabinets stick out. If there isn’t a large object rammed in the, there’s enough space to comfortably sit down on the floor as it slowly creeps its way up or down at 85 feet per minute.