I guess I need to figure out what I did to those configuration files but my brain is on fire

First, these three pictures of early stage tri-color foaming wax

Yeah— so I did the config all wrong for this server. Virtual host declarations aren’t in the files they should logically be in and things overlap and I just accidentally found some way to get a horribly blank directory listing to load instead of this page! Very weird, I think I just need to make a backup copy and rewrite the stuff. My apologies if you catch things broken as I’m doing it.

Pictures from The Cloud:

This is the top of the tower elevator and the inside of the tower top hut on Transtower. The lower level is really weird and basically was built by and for Gumby.

My brother sends me regular updates on this kitty named Luna being a cutie peets.

A newborn car wash? I think it’s a Mark VII system.
The ham shack as seen in “Akiba’s Trip”
Rainbow jugs
Useful meme

So I made a previous silly post about this Weston 622 milliammeter… It’s pretty interesting. Inside that removable plug, sealed in place with beeswax, are some kind of heating element and one side of a thermocouple. The other side of the thermocouple is in the meter body. This is actually really similar to the platinum RTD RF power measurement technique that’s the gold standard for average power level measurements on signals that have a varying peak to average power ratio (PAPR). It measures the RMS, “heating value” of the input by….. measuring its heating value! I tested it with DC because that was convenient and the 60+ year old meter agreed with a modern Fluke DMM.

I haven’t come across a ton of info or any original manuals on this meter, but it’s a little different than most I’ve seen when just searching the web or looking at eBay listings (it’s fairly common!). Mine has the thermocouple and heater in an interchangable plug, whereas most have it buried inside the meter case. This suggests that at some point Weston intended it to be used with different detectors. I wonder if there was to be one with 50 ohm coaxial input? A passive thermal RF power meter would be pretty cute!!